Угольная зола является побочным продуктом сгорания угля и обычно рассматривается как отходы., но на самом деле, coal ash contains some substances that are harmful to humans and the environment. Поэтому, it is very important to measure the content of hydrophobic, хлор, phosphorus and exact content in coal ash. Прежде всего, the role of measuring the content of sulfur, хлор, phosphorus and arsenic in coal is to protect the port environment and human health. Substances such as chlorine, phosphorus and other substances in coal may penetrate into the groundwater, resulting in pollution. В то же время, these substances exist in the air will also be a potential threat to human health. Поэтому, measuring the content of these substances can effectively control the degree of distribution of these hazardous substances in the environment and mouth. Во-вторых, coal ash has a wide range of uses. One of the main components of coal ash is silicon oxide. Will receive the application scenario of coal ash. Кроме того, coal ash also plays an important role in the iron and steel industry, after purification and treatment, some components of coal ash can also be reused: такой как, as a pure acid detergent, make steel more high-quality, in general, the determination of trace ash, хлор, фосфор, exact content of the role is extremely important, through this application, can reduce the ring and people by the good material. В то же время, coal friends have a wide range of application value, can provide support for all walks of life. Поэтому, the determination and utilization of coal ash is not only the most basic needs of people, but also the embodiment of the new progress in the process of scientific and technological development.

Точное содержание следов серы, хлор и фосфор в угольной золе определяли на энергодисперсионном рентгенофлуоресцентном спектрометре EDX8800M MAX.

As a high-energy vertical high-performance X-ray EDXRF material analyzer, the EDX8800M MAX is equipped with a high rate X-ray generation system and a high count rate and high resolution FSDD detector, который обеспечивает превосходный линейный динамический диапазон. Enables higher precision process and quality control in coal ash, металлы, цемент, минералы, добыча, стекло и керамика,
EDX800M MAX focuses on qualitative and quantitative analysis of major, trace and quantitative elements or compounds of various materials, широко используется в: alloy materials, драгоценные металлы, железо, non-ferrous metals and powders, металлургия, metal and non-gold heavy products, Fire materials, fire raw materials, lack of white powder, гипс, catalyst, cement lime glaze industry quartz feldite, кальцит, soil rock wool, soil solid waste dust removal ash chilli Ni, ash soil permanent magnet petroleum oil, slag and other production raw materials and finished chemical composition qualitative and quantitative rapid analysis, fast and accurate, неразрушающий, efficient environmental protection, no acid and base chemical agents.

The EDX8800M MAX has an FSDD silicon detector equipped with Peltie electrical cooling, which not only has excellent short-term repeatability and long-term reproducibility, but also has excellent elemental peak fraction. Simultaneous analysis of elements and oxides; Specially designed light path and vacuum system greatly improve the test precision and accuracy of the elements (aMg,Эл С,п). The gas distribution system can be selected at the same time to realize the direct measurement of liquid and powder samples. Eight optical path collocation systems can automatically switch according to different sample sizes, and can also test different positions of the sample and then calculate the average value. The error caused by the peak and low sample inhomogeneity can be equipped with a sample spin platform to increase the sample detection area. Improve test accuracy and precision and other advantages.
Точное содержание следов серы, хлор и фосфор в угольной золе определяли на энергодисперсионном рентгенофлуоресцентном спектрометре EDX8800M MAX.

The energy dispersive X-ray fluorescence spectrometer EDX880 MAX is a non-destructive technology used to separate the components in the sample. It has the advantages of fast precision and reliability. It can be used to close the trace elements in the coal. This technology also has a wide range of applications in other fields, например, металл, химический, food and other industries.

The following is a EDX8800M MAX test of coal ash test report: