Значење и сврха
The test method does not provide absolute information, but only ranks the selected paint series.

This test method can provide a pass-fail situation if the test contains known acceptable and unacceptable paint.

АСТМ Д 3793-2006 Low Temperature Polymerization of Latex Paint Films

Обим
1.1 This test method consists of determining the comparative coalescence of a series of latex paints by measuring the porosity of films dried at standard and low temperatures. Porosity was assessed using a penetrating medium as shown in test method D 3258.

1.2 The texture of the film will affect the cleaning and the test results. A stain applied to a high shading paint does not reduce the reflectivity as much as the same stain applied to a low shading paint with equal porosity. These points need to be considered when comparing different paints.

1.3 This method should only be applied to comparative tests within one laboratory, as numerical results obtained in different laboratories are usually inconsistent.

1.4 Вредности изражене у СИ јединицама сматрају се стандардима. Вредности дате у заградама су само за референцу.

Овај стандард није намењен да реши све безбедносне проблеме, ако их има, повезана са његовом употребом. Одговорност корисника овог стандарда је да успоставе одговарајуће безбедносне и здравствене праксе и да утврде применљивост регулаторних ограничења пре употребе.