Апстрактан
This specification covers a pressure-sensitive tape for sealing and sealing slip-top containers, such as fibre tubes and metal cans. Mylar back pressure sensitive tape is designed to be used for sealing and sealing containers with sliding LIDS, such as spiral wound pipes and metal cans, where strength, water resistance, water vapor resistance and rain resistance and other deterioration factors are required. The tape shall meet the specified physical performance requirements. The following test methods shall be performed to meet the specified requirements: адхезија; Shear adhesion tensile thickness; Relax; Water permeability; Water vapor transmittance; And accelerate aging.

This summary is a brief summary of the reference standards. It is informational only and not a formal part of the standard; The full text of the standard itself needs to be used and applied for reference. ASTM provides no warranties, изричито или имплицитно, и не представља да је садржај овог сажетка тачан, complete, or new.

ASTM D6590/D6590M-2020 Standard Specification for Pressure Sensitive Tape for Sealed Fiber Containers and Tanks

Корак 1: Обим
1.1 This specification covers a pressure-sensitive tape for sealing and sealing slip-top containers, such as fibre tubes and metal cans.

1.2 Values expressed in inch-pounds or SI units shall be treated as standards separately. Вредности наведене у сваком систему можда неће бити потпуно исте; Стога, each system needs to be used independently and the values cannot be combined in any way.

1.3 The following safety hazard warnings apply only to the Test Methods section of this specification: This standard is not intended to address all safety hazards associated with use. Одговорност корисника овог стандарда је да успоставе одговарајућу безбедност, здравствене и еколошке спецификације и да се утврди применљивост регулаторних ограничења пре употребе.

1.4 Овај међународни стандард је заснован на међународно признатим принципима стандардизације утврђеним Одлуком о принципима за израду међународних стандарда, Смернице и препоруке које је издала СТО Техничке баријере у трговини (ТБТ) Комитет.

ASTM D6590/D6590M-2020 Standard Specification for Pressure Sensitive Tape for Sealed Fiber Containers and Tanks

2. Погледајте фајл
АСТМ стандард

Д996 Еколошки услови паковања и дистрибуције

Test method for peel adhesion of D3330 / D3330M pressure sensitive tape

D3611 pressure sensitive tape accelerated aging practice

Test method for thickness of D3652 / D3652M pressure sensitive tape

Test method for shear adhesion of D3654 / D3654M pressure sensitive tape

Д3715 / Д3715М пракса осигурања квалитета траке осетљиве на притисак

Test method for breaking strength and elongation of D3759 / D3759M pressure sensitive tape

Test method for unwinding force of D3811 / D3811M pressure sensitive tape

Test method for water permeability of D3816 / D3816M pressure sensitive tape

Test method for water vapor transmittance of D3833 / D3833M pressure sensitive tape

D3951 Commercial packaging specification

D5570 used as a test method for water resistance of tapes and adhesives for box covers

ISO standard

ИСО 9002