TABER abrasion testing machine is suitable for testing the wear resistance of the finished shoe sole and the formed bottom (sheet). The principle is to press the rotating grinding wheel vertically on the sample, carry out abrasion test on the sample at a certain load, a certain speed and a certain time, and measure the length of the test wear mark.

TABER abrasion testing machines can be used to evaluate the wear resistance of products, as well as scratch resistance (single or multiple scratches) and color transmission. Both dry and wet wear tests can be carried out. IT is capable of testing samples of any size or shape, making it ideal for wear testing products with contoured and polished surface characteristics, such as computer mice and other computer or IT products.

TABER abrasion testing machine test method

The multi-functional wear testing machine is a multi-functional type that can carry out alcohol or other liquid media and cotton cloth friction test, eraser friction test, pencil hardness friction test three typical wear tests. Suitable for plastic, mobile phone shell, earphone shell screen printing, battery screen printing, keyboard printing, wire screen printing, leather and other electronic products surface spray, screen printing and other printing body for wear resistance, evaluation of its wear degree.

Precautions for use:

1, power supply conditions: Please configure the correct power supply according to the nameplate of the machine.

The input voltage error range is ± 10%, and ensure that the machine should be correctly grounded to prevent damage caused by leakage.

2. Operating environment: room temperature

3, should be placed on the horizontal table.

TABER abrasion testing machine test method

Test method:

1, wear testing machine test method first turn on the dual power switch.

2, the workpiece to be tested is fixed on the workbench, and strive to keep its friction part and the rubber head vertical and reasonable range.

3, according to the requirements of different states and different products, directly enter the cycle number of required friction on the counter, under normal circumstances, you must press the RESET key to reset before setting the data.

TABER abrasion testing machine test method

4, according to the different test range of different products, choose the suitable friction distance.

5, directly press the “Start” button to enter the normal state.

6, in the normal operation of the machine, if there is an abnormal situation, you can immediately press the “stop” button, at this time, all the operation of the machine will automatically stop. To restart, you need to repeatedly set the parameters (remaining values) for normal testing.

7, according to the selected number of friction after the operation is completed, you can make OK/NG judgment on the product according to the result.