ASTM D4707-17 Стандартний метод випробувань для вимірювання стійкості до бризок покриттів під час нанесення рулонами

Значення і використання

4.1 The paint splatter produced by roller application depends on the paint applied and the nature of the paint roller cover used for the application. In order to eliminate the effect of the paint drum cover as a variable, and therefore limit the sputtering induced variable only to the paint under test, the paint drum cover is replaced by a standard roller with a notch to produce sputtering through a mechanical device that simulates a mechanical drum. Paint drum cover.

4.2 Although much of the development to establish this test method has been carried out using latex paint, enough work has been done to demonstrate its suitability for solvent-reducible coatings.

4.3 Tests during the development of this test method have shown that, like other physical properties, the splash characteristics of coatings may change over time. тому, the results of this test are valid only while the test is running.

ASTM D4707-17 Стандартний метод випробувань для вимірювання стійкості до бризок покриттів під час нанесення рулонами

Крок 1: Область застосування

1.1 The test method includes determining the tendency of the paint roller to splash when applied to the substrate.

1.2 Цей стандарт не призначений для вирішення всіх питань безпеки, якщо хто-небудь, пов'язані з його використанням. Користувачі цього стандарту несуть відповідальність за встановлення належної техніки безпеки та охорони здоров’я та визначення застосовності нормативних обмежень перед використанням.

1.3 Цей міжнародний стандарт базується на міжнародно визнаних принципах стандартизації, встановлених у “Рішення про принципи розробки міжнародних стандартів, Настанови та рекомендації” виданий Комітетом СОТ з технічних бар’єрів у торгівлі (TBT) Комітет.

Поділіться цією публікацією