意义和目的
5.1 The function of these test methods is to define the percentage of adhesive and retroreflective optical elements or non-retroreflective particles in the composition of thermoplastic pavement markers, as defined in the applicable code for the manufacture of a particular thermoplastic pavement marker. Subsequent samples, due to ashing, can be used later to test for the presence of titanium dioxide, lead chromate and possibly organic pigments.

美国材料试验协会D 4797-2022 含铅酸和二氧化钛的白色和黄色热塑性路标材料的化学和重量分析

范围
1.1 These test methods cover procedures for gravimetric analysis of adhesives and hydrochloric acid (HCL) insoluble particles in white and yellow thermoplastic pavement markings. HCL insoluble particles may be retroreflective optical devices, such as glass beads or some other type of retroreflective optical devices, or non-retroreflective particles, such as silica sand, or any two or more combinations of these materials.

1.2 This standard does not address the physical separation and separate quantification of each component in the presence of mixtures of two or more HCL insoluble materials. Instead, it requires the user to visually assess the HCL insoluble material (obtained by following this test method) and report the type of material present.

1.3 This standard is not intended to address the measurement of titanium dioxide or lead chromate pigments (after ashing), as detailed in test methods D1394 and D126.

1.4 This standard will attempt to address the interference of organic pigments on adhesive results.

美国材料试验协会D 4797-2022 含铅酸和二氧化钛的白色和黄色热塑性路标材料的化学和重量分析

1.5 The analysis process is shown in the following order:

Percentage of adhesive

Reflector optical element or

Percentage of non-regurgitated particles

1.6 以 SI 单位表示的值应被视为标准. 括号内的数值仅供参考.

1.7 本标准并非旨在解决所有安全问题, 如果有的话, 与其使用相关. 本标准的使用者有责任建立适当的安全机制, 健康和环境实践，并在使用前确定监管限制的适用性.

1.8 本国际标准是根据《关于制定国际标准的原则的决定》中确立的国际公认的标准化原则制定的, 世界贸易组织贸易技术壁垒委员会发布的指南和建议.