意义和目的
3.1 Tests of the type described in this protocol can be used to assess the corrosion resistance of organic coatings on metal products exposed to high salt environments, such as areas subjected to deicing salts or coastal areas. Exposure conditions are complex and variable. Important factors include climate, time of year, presence of pollution, ETC. 一般来说, it is difficult, if not impossible, to precisely define or measure all the factors that influence degradation. Repeated exposure tests in different seasons and over a period of at least two years are required to obtain results that are representative of any given site.

3.2 It is necessary to always use a control sample because this is a comparative test.

美国材料试验协会D 6675-2015 汽车铜板有机涂层盐加速户外装饰腐蚀试验

范围
1.1 This practice is intended to assist in the procedures to be followed when undertaking outdoor exposures to assess the appearance corrosion that may occur in steel plates covered with damaged organic coatings. The outdoor exposure described was based on practice G7, which involved regular wetting of the test samples with a salt solution.

1.2 The method of preparing the specimens and the special exposure requirements of the materials are beyond the scope of this practice.

1.3 以 SI 单位表示的值应被视为标准. 括号内的数值仅供参考.

1.4 本标准并非旨在解决所有安全问题, 如果有的话, 与其使用相关. 本标准的使用者有责任建立适当的安全和健康实践，并在使用前确定监管限制的适用性.