意义及用途
4.1 This test will provide information on the ability of the coating applied to the pipe to resist cracking, peeling or other mechanical damage due to bending. Because the test is applicable to commercially produced coated pipes, the results can be directly used to select similar service materials. This test can also be used as a quality control method when changes in coating application or material formulation will affect bending properties.

ASTM G10-10-2019 管道涂层比弯曲性的标准测试方法

范围
1.1 This test method includes specific determination of the effect of short radius bending on coating of 33.4 毫米 (1 inch nominal) diameter pipe.

1.2 以SI单位表示的数值为准，保留三位有效小数. 括号内的数值仅供参考.

1.3 本标准并非旨在解决所有问题, 如果有的话, 与其使用相关的安全问题. 本标准的使用者有责任建立适当的安全机制, 健康和环境实践，并在使用前确定监管限制的适用性.

1.4 本国际标准基于《国际标准决定》中确立的国际公认的标准化原则, 世贸组织发布的技术性贸易壁垒指南和建议原则 (技术性贸易壁垒) 委员会.