前言
国际标准化组织 (国际标准化组织) 是国家标准机构的全球联合会 (ISO成员机构). 国际标准的制定通常通过ISO技术委员会进行. 每个对已成立技术委员会的主题感兴趣的成员团体都有权在委员会中派代表参加. 国际的, 与 ISO 联络的政府和非政府组织也参与了这项工作. ISO 与国际电工委员会密切合作 (国际电工委员会) 关于电气标准化的所有问题.

国际标准是按照第 2 部分给出的规则起草的。 2 ISO/IEC 指令的.

技术委员会的主要任务是制定国际标准. 技术委员会通过的国际标准草案将分发给成员机构进行投票. 作为国际标准的出版需要至少获得投票批准 75% of the member body.

请注意，本文档的某些内容可能是专利权的主题. ISO 不负责识别任何或所有此类专利.

国际标准化组织 23559 由ISO/TC技术委员会制定 61, 塑料, 小组委员会SC 11, 产品.

第二版取消并取代第一版 (国际标准化组织 23559:2007) by slightly revising the first edition (国际标准化组织 23559:2007) by introducing an additional specimen (for low strain) for the tensile impact test specified in Table 2.

国际标准化组织 23559-2011 塑料薄膜和片材热塑性薄膜测试指南

介绍
This international standard is intended to provide manufacturers and users with guidance for testing plastic film.

Although existing standards provide this guidance for many thin film products, they are very specific in terms of the materials covered and do not address many commercial films produced as mixtures or multilayer structures. 在某些情况下, existing standards are limited to a single process technology for producing thin films.

It is also recognized that the general standardized concept of film sample preparation is not currently realistic due to the numerous commercial processes used to produce films and the different processing parameters required for different materials, mixtures and/or structures. 另一方面, it is possible to standardize sample preparation for clearly defined materials and manufacturing processes, but this is not within the scope or intent of this document.

Safety Statement – Persons using this document should be familiar with normal laboratory practices (if applicable). 本文档并非旨在解决所有安全问题, 如果有的话, 与其使用相关. It is the user’s responsibility to establish appropriate safety and health practices and ensure compliance with any regulatory requirements.

国际标准化组织 23559-2011 塑料薄膜和片材热塑性薄膜测试指南

1 适用范围
This international standard identifies specific testing procedures to assist manufacturers and users in selecting and characterizing single – or multilayer thermoplastic films. It aims to provide a guide for films that do not have existing standards or specifications.

Note Due to the range of materials used and the variety of processes that can be used to produce various thin film structures, sample preparation is not covered in this document.

If an international standard exists for a particular film product, the requirements of that standard shall take precedence over this document.

There are many national, regional, and industry standards that address application-specific requirements. Since this international standard is intended to provide general guidance it is not within the scope of addressing these issues.

The importance and applicability of the data should be determined by the user.

2 规范性参考文件
The following reference files are required for the application of this file. 对于注明日期的参考文献, 仅引用版本适用. 对于未注明日期的引文, the most recent version of the referenced document (包括任何修订) 适用.

国际标准化组织 307, 塑料 – polyamides – Determination of viscosity values

国际标准化组织 527-3, 塑料 – 拉伸性能的测定 – 部分 3: Test conditions for films and sheets

国际标准化组织 1133-1, 塑料 – Determination of melt mass flow (熔体流动速率) and melt volume flow (微血管阻力) of thermoplastics – 部分 1: Standard method

国际标准化组织 1183-1, 塑料 – Determination of the density of non-foamed plastics – 部分 1: immersion method, liquid gravity flask method and titration method

国际标准化组织 1183-2, 塑料 – Determination of the density of non-foamed plastics – 部分 2: density gradient column method

国际标准化组织 1183-3, 塑料 – Determination of the density of non-foamed plastics – 部分 3: Gas specific gravity flask method

国际标准化组织 2813, 油漆和清漆 – Determination of the specular gloss of 20°, 60° 和 85° 非金属漆膜

国际标准化组织 4589-1, 塑料 – Determination of combustion behaviour by oxygen index – 部分 1: Guide

国际标准化组织 4589-2, 塑料 — Determination of combustion behaviour by oxygen index — 部分 2: ambient temperature test

国际标准化组织 4592, 塑料 – films and sheets – determination of length and width

国际标准化组织 4593, 塑料 – films and sheets – Determination of thickness by mechanical scanning

国际标准化组织 6383-1, 塑料 – films and sheets – Determination of tearing resistance – 部分 1: pant type tearing method

国际标准化组织 6383-2, 塑料 – films and sheets – Determination of tearing resistance – 部分 2: Elmendorf method

国际标准化组织 7765-1, plastic films and sheets – Determination of impact resistance by the free-fall method – 部分 1: Step method

国际标准化组织 7765-2, Plastic films and sheets – Determination of impact resistance by the free fall method – 部分 2: Instrumental puncture test

国际标准化组织 8256, 塑料 – Determination of tensile impact strength

国际标准化组织 8295, 塑料 – films and sheets – Determination of coefficient of friction

国际标准化组织 8296, 塑料 – films and sheets – determination of wetting tension

国际标准化组织 9773, 塑料 – Determination of the combustion behaviour of thin flexible vertical specimens in contact with a small flame ignition source

国际标准化组织 11357-2, 塑料 — Differential scanning calorimetry (差示扫描量热法) — 部分 2: Determination of glass transition temperature

国际标准化组织 11357-3, 塑料 — Differential scanning calorimetry (差示扫描量热法) — 部分 3: Determination of melting and crystallization temperature and enthalpy

– 国际标准化组织 11443, 塑料 – Determination of the fluidity of plastics using capillaries and slit die head rheometers

国际标准化组织 11501, 塑料 – films and sheets – Determination of dimensional changes in heating

国际标准化组织 11502, 塑料 – films and sheets – Determination of adhesion resistance

国际标准化组织 13468-1, 塑料 – Determination of total light transmittance of transparent materials – 部分 1: single beam instrument

国际标准化组织 13468-2, 塑料 — Determination of total light transmittance of transparent materials — 部分 2: Double beam instrument

国际标准化组织 14782, 塑料 — determination of fog in transparent materials

国际标准化组织 15105-1, 塑料 – films and sheets – Determination of gas transmittance – 部分 1: differential pressure method

国际标准化组织 15105-2, 塑料 – films and sheets – Determination of gas permeability – 部分 2: isobaric method

国际标准化组织 15106-1, 塑料 – films and sheets – Determination of water vapour transmittance – 部分 1: Humidity detection sensor method

国际标准化组织 15106-2, 塑料 – films and sheets – Determination of water vapour transmittance – 部分 2: Infrared detection sensor method

国际标准化组织 15106-3, 塑料 – films and sheets – Determination of water vapour transmittance – 部分 3: electrolytic detection sensor method

国际标准化组织 15989, 塑料 – films and sheets – Measurement of water contact angles for corona treated films

国际电工委员会 60093, Test method for volume and surface resistivity of solid electrical insulating materials

国际电工委员会 60112, Verification and comparison of solid insulating materials – Determination of leakage trace index

国际电工委员会 60243-1, Electrical strength of insulating materials – 测试方法 – 部分 1: power frequency test

国际电工委员会 60250, recommended method for determining the dielectric constant and dielectric loss factor of electrical insulating materials at power, audio and radio frequencies (including meter wavelengths)

ASTM D882, Standard Test Method for Tensile Properties of Thin plastic Sheets

ASTM D5458, Standard Test method for Peel Adhesion of Stretched Packaging Film

ASTM D5459, Standard Test Method for Longitudinal Elastic Recovery and Permanent Deformation and Stress Retention of Stretched Packaging Films

ASTM D5748, Standard Test method for Resistance to Protruding Puncture of Stretched Packaging films

ASTM F88, Standard Test Method for Seal Strength of Flexible Barrier Materials

ASTM F1921, Standard Test Method for Thermal Sealing Strength (Thermal Viscosity) of Thermoplastic polymers and Blends Containing Flexible Web Sealing Surfaces

3 术语和定义
就本文件而言, 以下术语和定义适用.

3.1 Thin Film

Films of nominal thickness not greater than 0.25 毫米

参赛须知 1: Although not specifically defined in ISO 472, the 0.25mm limit is noted. ASTM D883 specifically defines thin films as ≤ 0.25mm.

笔记 2 Sheets with nominal thickness greater than 0.25mm May be too hard to use a test method more suitable for thinner structures.

仅标准信息部分是公开的. 查看完整内容, 需要通过官方渠道购买标准.