How to solve the jitter when the decentralized machine is running?

When the dispersion machine jitter occurs during operation, it may be caused by the following reasons:

Unbalanced load: Ensure that the material in the dispersion machine is evenly distributed and the weight is balanced. If there is a large material accumulation on one side or the dispersion is unbalanced inside, it will cause shaking. Distribute the material evenly and balance the load.

Unstable equipment installation: Check whether the installation of the dispersion machine is stable and ensure that its support structure and foundation are firm. Adjust and secure the support feet to keep the device in a stable position.

High speed: If the speed of the dispersion machine is set too high, it may cause jitter. Reduce the rotational speed to ensure operation within the specified operating range of the equipment.

Uneven liquid: If the liquid formula is not uniform, it may cause the dispersion machine to jitter during the mixing process. Make sure to mix the ingredients well to form a uniform liquid.

Equipment damage or wear: Check the parts and transmission devices of the dispersion machine for damage or wear, such as bearings, belts, gears, etc. Replace or repair damaged parts promptly if necessary.

If the above methods still cannot solve the jitter problem, it is recommended to contact the device manufacturer or professional maintenance personnel to check and repair. They can provide more accurate guidance and solutions depending on the specific situation. Follow the safety regulations when operating the device to ensure the safety of the human body and the device.