ASTM D4355-0 Metodo di prova standard per il deterioramento dei geotessili sotto esposizione alla luce, Umidità, e calore nei dispositivi ad arco di xeno
ASTM D4355 è un metodo di prova standard per il deterioramento dei geotessili esposti alla luce, umidità, and heat in xenon arc type equipment. This test describes the determination of tensile strength degradation of any permeable textile material used for soil, foundation, suolo, rock, eccetera. It is based on ASTM G155 practices.
ASTM D4355-0 Metodo di prova standard per il deterioramento dei geotessili sotto esposizione alla luce, Umidità, e calore nei dispositivi ad arco di xeno
Deterioration of geotextiles
By exposing the sample to xenon arc radiation, moisture and heat (end-use conditions), it is intended to cause property changes. Infatti, when exposed to these types of factors, polymers can have significantly altered mechanical, elettrico, and optical properties. Localized weather-induced deterioration simulations, such as atmospheric pollution, biological attacks, and saline exposure, are not expected by the exposures used in this practice. After each exposure period, the sample is cut or stretched strip stretched to produce a degradation curve. The latter allows users to determine the tendency of geotextile materials to deteriorate when exposed to various factors such as solar radiation, water and heat. For a combination of UV exposure and salt water, you should consider ASTM D5894.
Typical experimental parameters for ASTM D4355 testing
The characteristics and operating conditions of the samples are specified in Tables 1 E 2, rispettivamente.
ASTM D4355-0 Metodo di prova standard per il deterioramento dei geotessili sotto esposizione alla luce, Umidità, e calore nei dispositivi ad arco di xeno
Table I: Specifications of sample characteristics
argument | Specifiche di prodotto |
Number of specimens required | 20 for each test direction |
Dimensioni del campione | 50 X 150 mm (2 X 6 In) |
spessore | Within ± 10% of nominal size |
Tavolo 2: Specifications of equipment operating conditions
irradiance | At 340nm |
0.35W/(m2nm) Maintained at 0.02W/(m2nm) | |
Periodo di esposizione | Only 90 minutes oF light at 65±3 oC (149±5 oF) uninsulated black panel temperature; |
30 minutes of light spray | |
Umidità relativa | 50±10% |
(Only during exposure) | |
Lamp filter | To specify |
(Luce del giorno, window glass or extended UV) |