ASTM D2370-16-2021 有機コーティングの引張特性に関する標準試験方法

意味と目的
5.1 The tensile properties measured by this method are valuable for studying the behaviour of coatings under environmental stresses such as those arising from ageing and weathering. (See references (1-10).) 4

5.2 Tensile properties may vary with specimen thickness, preparation method, spacing, rate of load application, response of tensile tester and type of fixture used. したがって, these factors need to be carefully controlled if precise comparative results are required.

ASTM D2370-16-2021 有機コーティングの引張特性に関する標準試験方法

の範囲
1.1 This test method covers the determination of elongation, tensile strength and stiffness (弾性率) of organic coatings when tested as free films.

1.2 Values expressed in SI units are treated as standard values. The values given in parentheses are mathematical conversions of inch-pound units and are for reference only and are not considered standard values.

1.3 この規格は、すべての安全問題に対処することを目的としたものではありません, もしあれば, その使用に関連する. 適切な安全性を確立するのは、この規格のユーザーの責任です。, 健康および環境慣行を確認し、使用前に規制制限の適用可能性を判断するため.

ASTM D2370-16-2021 有機コーティングの引張特性に関する標準試験方法

1.4 この国際規格は、貿易の技術的障壁に関する委員会の決定で確立された国際的に受け入れられた標準化原則に従って開発されました。 (未定) 国際標準の策定に関する世界貿易機関, ガイドラインと推奨される原則.

この投稿をシェアする