ISO 6860-2006 “塗料およびワニスの曲げ試験 (円錐シャフト)”
序文
ISO (国際標準化機構) 国家標準化団体の世界的な同盟です (ISO会員団体). 国際規格の開発は通常、ISO 技術委員会を通じて行われます。. 技術委員会が設立された主題に関心を持つ各加盟機関は、委員会に代表される権利を有する。. 標準化団体と連携する政府および非政府の国際機関もこの作業に関与しています。. ISO は国際電気標準会議と緊密に連携しています。 (IEC) 電気の標準化に関するあらゆる問題について.
国際規格は、第 1 部に記載されている規則に従って草案されます。 2 ISO/IEC 指令の.
技術委員会の主な任務は国際標準を開発することです. 技術委員会によって採択された国際規格草案は、投票のために加盟団体に配布されます。. 国際標準として発行するには、少なくとも承認が必要です 75% 加盟機関の.
本書の内容によっては特許権の対象となる場合がありますのでご注意ください。. ISO は、そのような特許権の一部またはすべてを特定する責任を負いません。.
ISO 6860-2006 “塗料およびワニスの曲げ試験 (円錐シャフト)”
ISO 6860 ISO/TC 技術委員会によって開発されました 35, 塗料とワニス, 分科会SC 9, 塗料およびワニスの一般的な試験方法.
第 2 版はキャンセルされ、初版と置き換わります。 (ISO 6860:1984), 技術的に見直されたもの. 主な変更点は次のとおりです。:
– an indication of the rolling direction of the aluminum plate is added in paragraph 5.1;
— The diameter of the small end of the cone has been changed to (3,1 ± 0,1) mm so that the equipment standardized in ASTM conforms to international standards;
— 本文は加筆・修正しました.
ISO 6860-2006 “塗料およびワニスの曲げ試験 (円錐シャフト)”
導入
This international standard is one of five documents (see also ISO 1519, ISO 1520, ISO 6272-1 およびISO 6272-2) that provide empirical test procedures for the evaluation of the resistance of paints, varnish and related product coatings to cracking and/or exfoliation from substrates under different deformation conditions.
1 範囲
This INTERNATIONAL standard describes an empirical test procedure for evaluating the resistance of paints, varnishes or related product coatings to cracking and/or shedding from metal substrates when bent around tapered manshafts under standard conditions.
For multi-coating systems, each coating can be tested individually or the entire system can be tested.
2 規範的参照
この文書の適用には以下の参照が必要です. 日付の付いた参照については, 引用されたバージョンのみが適用されます. 日付のない参考文献については, リファレンスの新しいバージョン (改訂も含めて) 当てはまる.
ISO 1513, 塗料とワニス — 試験サンプルの検査と調製
ISO 1514, 塗料とワニス — 試験標準パネル
ISO 2808, 塗料とワニス — 膜厚の決定
ISO 15528, 塗料, ワニスおよび塗料およびワニスの原料 — サンプリング
標準情報コンポーネントのみが公開されています. 完全なコンテンツを表示するには, 正規のルートを通じて規格を購入する必要があります.