의미와 용도
4.1 This test method provides basic engineering data that can be used to determine the amount of VOC delivered to the inlet of VOC control equipment. This procedure can be used to determine the amount of VOC produced from the coating in a flash area or oven and can be incinerated, although the same procedure can be followed when using other forms of VOC abatement.

4.2 VOC 제어 장치에 의해 공정에서 제거된 VOC의 총량은 테스트 방법에 의해 제공되는 이용 가능한 양과 제어 장치의 VOC 제거 효율의 함수입니다..

범위
1.1 This test method describes the determination of the amount of volatile organic compounds (VOC) released from applied waterborne automotive coatings that can be used for delivery to VOC control equipment. The determination is accomplished by measuring evaporative or dry weight loss of the newly coated test plate and analyzing the VOC or water content of the coating.

1.2 This test method is applicable to VOC released from application and baking operations after painting in simulated production processes or actual production facilities.

1.3 Symbols and calculations of several other methods for determining VOC: Practice D3960, EPA 450/3-88-018 and EPA 450/3-84-019 have been incorporated into this test method. Most of the notations and calculations used in this test method are unique because the test method uniquely deals with weight differences in applied paint samples that have been dried, cured, or solvent-added.

ASTM D 6266-2017 “휘발성 유기 화합물의 양 측정 (VOC) 수성 자동차 코팅제에서 배출되는 양과 제거된 양 (감소된 금액) 음성 제어 장치에서”

메모 1: The importance of training and knowledge of the evaluated product to derive meaningful data from this test methodology is overstated. It is recommended that multiple practice runs and laboratory repeatability be evaluated before performing this test on test samples.

1.4 SI 단위로 표현된 값은 표준으로 간주됩니다.. 괄호 안의 값은 참고용입니다..

1.5 이 표준은 모든 문제를 다루려는 것이 아닙니다., 만약에 어떠한, 사용과 관련된 안전 문제. It is the responsibility of any user of this standard to consult and establish appropriate safety and health practices and to determine the applicability of regulatory restrictions before using this standard.

1.6 이 국제 표준은 국제 표준 개발 원칙에 관한 결정에서 확립된 국제적으로 인정된 표준화 원칙을 기반으로 합니다., WTO 무역기술장벽위원회가 발행한 지침 및 권고사항.