HZBB-10A high and low voltage 3 phase transformer turns ratio tester

Category:

Description

HZBB-10A  Transformer Turns Ratio Tester

I.Preface

During the processing of the semi-finished products and the finished products in transformer production, the transformer newly installation before using, or according to IEC and national standard, the turns ratio or voltage ratio should be tested in the circle rate. Traditional bridge method is complicated, and can’t read the data directly, and you have to make conversion, the testing results are data of one phase. Turns ratio tester of HZBB-10A overcomes the shortcomings of traditional bridge method. The monitor adopts big screen with lattice liquid crystal, which has the function of indicating by menu, operating easily and directly. It finishes test of three-phase voltage ratio or turns ratio once, fast testing and high precise.

HZBB-10A  Transformer Turns Ratio Tester

II. Functions And Characters

1.Precision inverter three-phase measuring power supply is adopted in the instrument to measure more accurately.

2.Adopt three-phase output voltage, three-phase pressure, three-phase simultaneous measurement, improve test speed, and automatically identify transformer wiring group.

3.Applicable to a wide variety of transformers, especially for the Z type transformer, rectifier transformer, grounding transformer, furnace transformer, phase shift transformer, balance transformer and other transformer measurement, measurement parameters are the most comprehensive.

4. The use of precision three-phase inverter power supply, with high and low voltage reverse polarity protection, transformer inter-turn short circuit protection, on-off tap-changer not in place protection, the output short-circuit protection, Which increases instrument stability.

5. After inputting the rated parameter, it can automatically measure the transformer ratio value, error value and on-load tap-changer position.

6. 65K true color LCD, modular liquid crystal display.

7. The device can be equipped with both print output, USB port and RS232 port, which is convenient for paperless office.

8. The use of cold and heat resistant, sealed, waterproof, anti shock and multi-function engineering plastic box, easy field test.

HZBB-10A  Transformer Turns Ratio Tester

III. Technical Index

1.Rating: 0.9~10000

2.Accuracy: ±0.1%(below500)   0.2%(501-2000)  0.5%(2001-10000)

3.Resolution: Minimum is 0.0001

4.Working power supply: AC 220V±10%   50Hz

5. Applied temperature: -10℃~40℃

6. Relative humidity: ≤85%, non-condensing

7. Dimension;tester:360*290*170(mm) Wire box:360*290*170(mm)

8.Weight:tester 5.9KG Wire box:5.65KG

PackingList

No.ItemQty
1Main engine1
2Power line1
3Red test line1
4Black test line1
5Fuse pipe2
6Print paper1
7Ground lead1
8Serial port line1






    has been added to your cart:
    Checkout