ไอเอสโอ 3251-2019 “การหาปริมาณสารประกอบไม่ระเหยในสี, สารเคลือบเงาและพลาสติก”

คำนำ
ไอเอสโอ (องค์กรระหว่างประเทศเพื่อการมาตรฐาน) เป็นหน่วยงานมาตรฐานแห่งชาติ (สมาชิกไอเอสโอ) ของสหพันธ์โลก. การพัฒนามาตรฐานสากลมักดำเนินการผ่านคณะกรรมการด้านเทคนิคของไอเอสโอ. Each interested in the subject of which a technical committee has been set up members of the group have the right to send representatives to participate in the committee. Liaison with ISO international organizations, governments and ngos to participate in the work. ISO with the international electrotechnical commission (ไออีซี) on all electrical and standardized issues closely.

ส่วนหนึ่ง 1 ของคำสั่ง ISO/IEC อธิบายขั้นตอนที่ใช้ในการพัฒนาเอกสารนี้ตลอดจนขั้นตอนที่ใช้สำหรับการบำรุงรักษาเพิ่มเติม. โดยเฉพาะอย่างยิ่ง, ควรให้ความสนใจกับเกณฑ์การอนุมัติที่แตกต่างกันที่จำเป็นสำหรับเอกสาร ISO ประเภทต่างๆ. เอกสารนี้ได้รับการร่างขึ้นตามกฎบรรณาธิการของส่วน 2 ของคำสั่ง ISO/IEC (ดูที่ iso.org/directives).

โปรดทราบว่าองค์ประกอบบางอย่างของเอกสารนี้อาจอยู่ภายใต้สิทธิในสิทธิบัตร. ISO จะไม่รับผิดชอบในการระบุสิทธิในสิทธิบัตรดังกล่าวบางส่วนหรือทั้งหมด. In the process of document development determine the detailed information of any patent rights in the introduction and/or received ISO (ดูที่ iso.org/patents) patent statement list.

ไอเอสโอ 3251-2019 “การหาปริมาณสารประกอบไม่ระเหยในสี, สารเคลือบเงาและพลาสติก”

ชื่อทางการค้าใดๆ ที่ใช้ในเอกสารนี้จัดทำขึ้นเพื่อเป็นข้อมูลเพื่อความสะดวกของผู้ใช้ และไม่ถือเป็นการรับรองชื่อดังกล่าว.

การตีความโดยสมัครใจ, related standards and conformity assessment related ISO specific terminology and express the meaning of and the ISO in the technical barriers to trade (จะแจ้งภายหลัง) ยึดมั่นในหลักการขององค์กรการค้าโลก (องค์การการค้าโลก) ข้อมูล, please refer to

Iso.org/iso/foreword.html.

This document is prepared by Technical Committee ISO/TC 35, สีและสารเคลือบเงา, คณะอนุกรรมการ สค 9, General Test methods for paints and varnishes.

The fifth edition eliminates and replaces the fourth edition (ไอเอสโอ 3251:2008), ซึ่งได้รับการแก้ไขทางเทคนิคแล้ว. The main changes from the previous edition are as follows:

ไอเอสโอ 3251-2019 “การหาปริมาณสารประกอบไม่ระเหยในสี, สารเคลือบเงาและพลาสติก”

To ISO 4618 – increased in clause 3 general reference of the terms and definitions:

— 4.5 example of desiccant to silica gel in orange, because no longer allowed to use cobalt chloride as the indicator;

Corrected accuracy data for polymer dispersions: the figures given in the 2008 edition were ± data, which have now been correctly converted to percentages;

General test parameters for paint powders (powder resins) have been removed from Table A.1 because ISO 8130-7 can be used instead;

Added common test parameters for waterborne coatings in Table A.1.

Any feedback or question this file should be submitted to the national standards organizations of users. A full list of these agencies can be found at iso.org/members.html.

ไอเอสโอ 3251-2019 “การหาปริมาณสารประกอบไม่ระเหยในสี, สารเคลือบเงาและพลาสติก”

การแนะนำ
For methods that can be used for unplasticized polymer dispersions and rubber latex, the non-volatile residues (mainly composed of polymer materials and small amounts of additives, such as emulsifiers, protective colloids, stabilizers, solvents added as film forming agents andespecially for rubber latex concentratespreservatives) need to be chemically stable under the test conditions. For plasticized samples, residues usually include plasticizers by definition.

ไอเอสโอ 3233 (ทุกส่วน) specifies test methods for determining the content of non-volatile substances in paints, varnishments and related products.

1 ขอบเขตการใช้งาน
This document specifies a determination of paint, วานิช, paint and varnish binder, polymer dispersions and condensation resin (such as phenolic resin (JiaJie phenolic resin and novolac solution, ฯลฯ)) method of non-volatile matter content.

This method can also be applied to preparation containing fillers, pigments and other additives, such as thickening agent, film former dispersions.

บันทึก 1: the product of the volatile matter content is not absolute, but rather depends on the determination of the temperature and heating time. ดังนั้น, when this method is used, only relative rather than true values of the non-volatile content can be obtained due to solvent retention, thermal decomposition, and evaporation of low molecular weight components. ดังนั้น, this method is mainly used to test different batches of the same type of product.

บันทึก 2 This method is suitable for synthetic rubber latex, provided that heating for a specified period of time is considered appropriate (ไอเอสโอ 124 provides heating until the mass loss of 2 g of the test portion is less than 0.5 mg after continuous heating).

ไอเอสโอ 3251-2019 “การหาปริมาณสารประกอบไม่ระเหยในสี, สารเคลือบเงาและพลาสติก”

บันทึก 3 Internal methods for determining nonvolatile substances usually include drying with infrared or microwave radiation. The standardization of this kind of method is impossible, because they are not universal. Several polymer compositions tend to break down during this treatment and therefore give incorrect results.

2 เอกสารอ้างอิงเชิงบรรทัดฐาน
In the article refer to the following documents, the requirements of some or all of the content of this document. สำหรับการอ้างอิงลงวันที่, ใช้เฉพาะเวอร์ชันที่อ้างถึงเท่านั้น. สำหรับการอ้างอิงที่ไม่ระบุวันที่, the new version of the applicable reference documents (รวมถึงการแก้ไขใดๆ).

ไอเอสโอ 123, Rubber latex – การสุ่มตัวอย่าง

ไอเอสโอ 124, น้ำยาง, ยาง, the determination of total solid content

ไอเอสโอ 1513, สีและสารเคลือบเงา – test sample inspection and preparation

ไอเอสโอ 4618, สีและสารเคลือบเงา – terms and definitions

ไอเอสโอ 15528, สี, วาร์นิชและวัตถุดิบสำหรับสีและวาร์นิช — การสุ่มตัวอย่าง

ไอเอสโอ 3251-2019 “การหาปริมาณสารประกอบไม่ระเหยในสี, สารเคลือบเงาและพลาสติก”

3 ข้อกำหนดและคำจำกัดความ
เพื่อวัตถุประสงค์ของเอกสารฉบับนี้, กำหนดไว้ใน ISO 4618 เป็นไปตามข้อกำหนดและคำจำกัดความ.

ISO และ IEC ดูแลรักษาฐานข้อมูลคำศัพท์เพื่อการกำหนดมาตรฐานตามที่อยู่ต่อไปนี้:

– แพลตฟอร์มการสืบค้นออนไลน์ ISO: iso.org/obp

– IEC อิเล็กโทรพีเดีย: ดูได้ที่ electropedia.org/

เฉพาะองค์ประกอบข้อมูลมาตรฐานเท่านั้นที่เปิดเผยต่อสาธารณะ. หากต้องการดูเนื้อหาทั้งหมด, คุณจะต้องซื้อมาตรฐานผ่านช่องทางที่เป็นทางการ.

แชร์โพสต์นี้