ASTM D3574 ISO 2439 Sponge Compression Fatigue Hardness Testing Machine
- Description
- Inquiry
Description
ASTM D3574ISO 2439 Sponge Compression Fatigue Hardness Testing Machine
Standards:
GB/T10807-89;ISO 2439-1980;JISK6401;ASTM D3574;AS 2282.8 Method A-IFD Test.
ASTM D3574ISO 2439 Sponge Compression Fatigue Hardness Testing Machine
Product Application:
Sponge /foam indentation hardness testing machine is also known as sponge, foam indentation hardness testing machine, tensile metallic and non-metallic, polymer materials, compression, bending, detection of low cycle fatigue and other projects can be according to customer product requirements according to GB, ISO, ASTM, JIS, EN and other standards for the preparation, to automatically strike the biggest test, fracture strength, yield strength, tensile strength, compressive strength, flexural strength, elastic modulus, elongation , constant elongation stress, elongation and other parameters given stress.
ASTM D3574ISO 2439 Sponge Compression Fatigue Hardness Testing Machine
Main feature:
1.Automatic counting, automatic indentation of 80,000 times to stop there Pause
2. High precision pressure sensors and large-scale integrated circuits, accurate determination.
3. Can always manually adjust indentation load, to keep it at 750 Newton
ASTM D3574ISO 2439 Sponge Compression Fatigue Hardness Testing Machine
Specification:
Sensing method | Force sensor automatic dispaly |
Load Cell Capacity | 300Kg |
Motor | Servo motor control system |
Unit switch | Kg,N,Lb |
Accuracy | 0.5 grade(±0.5%) |
Testing stroke | 200mm |
Test speed | 100±20mm/min |
Size of upper compressing plate | Diameter 200mm |
Bottom Border-radius | R1mm |
Lower platform | 420mmx420mm |
Air hole diameter | 6.0mm |
Hole center gap | 20mm |
Specimen size | (380+10)mmx(380+10)mmx(50±3)mm |
Power | AC220V |