ISO 23559-2011 Poradnik do badania folii z tworzyw sztucznych i folii termoplastycznych w arkuszach
przedmowa
ISO (Międzynarodowa Organizacja Normalizacyjna) to globalna federacja krajowych organów normalizacyjnych (Organy członkowskie ISO). Opracowywanie norm międzynarodowych odbywa się zwykle za pośrednictwem komitetów technicznych ISO. Each member group interested in a subject on which a technical committee has been established has the right to be represented on the Committee. International, governmental and non-governmental organizations in liaison with ISO are also involved in this work. ISO ściśle współpracuje z Międzynarodową Komisją Elektrotechniczną (IEC) we wszystkich kwestiach normalizacji elektrycznej.
Normy międzynarodowe opracowywane są zgodnie z zasadami podanymi w Części 2 dyrektywy ISO/IEC.
Głównym zadaniem komitetu technicznego jest ustalanie międzynarodowych standardów. Projekty norm międzynarodowych przyjęte przez Komitet Techniczny zostaną rozesłane do organów członkowskich w celu głosowania. Publication as an international standard requires approval by a vote of at least 75% of the member body.
Należy pamiętać, że niektóre elementy tego dokumentu mogą być przedmiotem praw patentowych. ISO nie jest odpowiedzialna za identyfikację któregokolwiek lub wszystkich takich patentów.
ISO 23559 został opracowany przez Komitet Techniczny ISO/TC 61, Tworzywa sztuczne, Podkomisja SC 11, Produkty.
This second edition cancels and replaces the first edition (ISO 23559:2007) by slightly revising the first edition (ISO 23559:2007) by introducing an additional specimen (for low strain) for the tensile impact test specified in Table 2.
ISO 23559-2011 Poradnik do badania folii z tworzyw sztucznych i folii termoplastycznych w arkuszach
wprowadzić
This international standard is intended to provide manufacturers and users with guidance for testing plastic film.
Although existing standards provide this guidance for many thin film products, they are very specific in terms of the materials covered and do not address many commercial films produced as mixtures or multilayer structures. W niektórych przypadkach, existing standards are limited to a single process technology for producing thin films.
It is also recognized that the general standardized concept of film sample preparation is not currently realistic due to the numerous commercial processes used to produce films and the different processing parameters required for different materials, mixtures and/or structures. Z drugiej strony, it is possible to standardize sample preparation for clearly defined materials and manufacturing processes, but this is not within the scope or intent of this document.
Safety Statement – Persons using this document should be familiar with normal laboratory practices (jeśli ma to zastosowanie). This document is not intended to address all security concerns, Jeśli w ogóle, związane z jego użytkowaniem. It is the user’s responsibility to establish appropriate safety and health practices and ensure compliance with any regulatory requirements.
ISO 23559-2011 Poradnik do badania folii z tworzyw sztucznych i folii termoplastycznych w arkuszach
1 Szereg zastosowań
This international standard identifies specific testing procedures to assist manufacturers and users in selecting and characterizing single – or multilayer thermoplastic films. It aims to provide a guide for films that do not have existing standards or specifications.
Note Due to the range of materials used and the variety of processes that can be used to produce various thin film structures, sample preparation is not covered in this document.
If an international standard exists for a particular film product, the requirements of that standard shall take precedence over this document.
There are many national, regional, and industry standards that address application-specific requirements. Since this international standard is intended to provide general guidance it is not within the scope of addressing these issues.
The importance and applicability of the data should be determined by the user.
2 Normative reference files
The following reference files are required for the application of this file. Dla przestarzałych odniesień, obowiązują wersje zawierające wyłącznie cytaty. Za niedatowane cytaty, the most recent version of the referenced document (including any amendments) ma zastosowanie.
ISO 307, Tworzywa sztuczne – polyamides – Determination of viscosity values
ISO 527-3, tworzywa sztuczne – Oznaczanie właściwości rozciągających – Część 3: Test conditions for films and sheets
ISO 1133-1, tworzywa sztuczne – Determination of melt mass flow (MFR) i przepływ objętościowy stopu (MVR) of thermoplastics – Część 1: Standard method
ISO 1183-1, tworzywa sztuczne – Determination of the density of non-foamed plastics – Część 1: immersion method, liquid gravity flask method and titration method
ISO 1183-2, tworzywa sztuczne – Determination of the density of non-foamed plastics – Część 2: density gradient column method
ISO 1183-3, tworzywa sztuczne – Determination of the density of non-foamed plastics – Część 3: Gas specific gravity flask method
ISO 2813, Farby i lakiery – Determination of the specular gloss of 20°, 60° i 85° niemetaliczne powłoki lakiernicze
ISO 4589-1, tworzywa sztuczne – Determination of combustion behaviour by oxygen index – Część 1: Guide
ISO 4589-2, tworzywa sztuczne — Determination of combustion behaviour by oxygen index — Część 2: ambient temperature test
ISO 4592, tworzywa sztuczne – films and sheets – determination of length and width
ISO 4593, Tworzywa sztuczne – films and sheets – Determination of thickness by mechanical scanning
ISO 6383-1, tworzywa sztuczne – films and sheets – Determination of tearing resistance – Część 1: pant type tearing method
ISO 6383-2, tworzywa sztuczne – films and sheets – Determination of tearing resistance – Część 2: Elmendorf method
ISO 7765-1, folie i arkusze z tworzyw sztucznych – Determination of impact resistance by the free-fall method – Część 1: Metoda krokowa
ISO 7765-2, Plastic films and sheets – Determination of impact resistance by the free fall method – Część 2: Instrumentalna próba przebicia
ISO 8256, Tworzywa sztuczne – Determination of tensile impact strength
ISO 8295, Tworzywa sztuczne – films and sheets – Determination of coefficient of friction
ISO 8296, Tworzywa sztuczne – films and sheets – determination of wetting tension
ISO 9773, tworzywa sztuczne – Determination of the combustion behaviour of thin flexible vertical specimens in contact with a small flame ignition source
ISO 11357-2, tworzywa sztuczne — Differential scanning calorimetry (DSC) — Część 2: Determination of glass transition temperature
ISO 11357-3, tworzywa sztuczne — Differential scanning calorimetry (DSC) — Część 3: Determination of melting and crystallization temperature and enthalpy
– ISO 11443, Tworzywa sztuczne – Determination of the fluidity of plastics using capillaries and slit die head rheometers
ISO 11501, tworzywa sztuczne – films and sheets – Determination of dimensional changes in heating
ISO 11502, tworzywa sztuczne – films and sheets – Determination of adhesion resistance
ISO 13468-1, tworzywa sztuczne – Determination of total light transmittance of transparent materials – Część 1: single beam instrument
ISO 13468-2, Tworzywa sztuczne — Determination of total light transmittance of transparent materials — Część 2: Double beam instrument
ISO 14782, Tworzywa sztuczne — determination of fog in transparent materials
ISO 15105-1, tworzywa sztuczne – films and sheets – Determination of gas transmittance – Część 1: differential pressure method
ISO 15105-2, tworzywa sztuczne – films and sheets – Determination of gas permeability – Część 2: isobaric method
ISO 15106-1, tworzywa sztuczne – films and sheets – Determination of water vapour transmittance – Część 1: Humidity detection sensor method
ISO 15106-2, tworzywa sztuczne – films and sheets – Determination of water vapour transmittance – Część 2: Infrared detection sensor method
ISO 15106-3, tworzywa sztuczne – films and sheets – Determination of water vapour transmittance – Część 3: electrolytic detection sensor method
ISO 15989, Tworzywa sztuczne – films and sheets – Measurement of water contact angles for corona treated films
IEC 60093, Test method for volume and surface resistivity of solid electrical insulating materials
IEC 60112, Verification and comparison of solid insulating materials – Determination of leakage trace index
IEC 60243-1, Electrical strength of insulating materials – Metody testowe – Część 1: power frequency test
IEC 60250, recommended method for determining the dielectric constant and dielectric loss factor of electrical insulating materials at power, audio and radio frequencies (including meter wavelengths)
ASTM D882, Standard Test Method for Tensile Properties of Thin plastic Sheets
ASTM D5458, Standard Test method for Peel Adhesion of Stretched Packaging Film
ASTM D5459, Standard Test Method for Longitudinal Elastic Recovery and Permanent Deformation and Stress Retention of Stretched Packaging Films
ASTM D5748, Standard Test method for Resistance to Protruding Puncture of Stretched Packaging films
ASTM F88, Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM F1921, Standard Test Method for Thermal Sealing Strength (Thermal Viscosity) of Thermoplastic polymers and Blends Containing Flexible Web Sealing Surfaces
3 Warunki i definicje
Na potrzeby niniejszego dokumentu, zastosowanie mają następujące terminy i definicje.
3.1 Thin Film
Films of nominal thickness not greater than 0.25 mm
Notatka wpisowa 1: Although not specifically defined in ISO 472, the 0.25mm limit is noted. ASTM D883 specifically defines thin films as ≤ 0.25mm.
Notatka 2 Sheets with nominal thickness greater than 0.25mm May be too hard to use a test method more suitable for thinner structures.
Tylko standardowa sekcja informacyjna jest publiczna. Aby zobaczyć pełną treść, musisz kupić standard za pośrednictwem oficjalnych kanałów.