Description

Bonding fixture

Product introduction:

Corrugated cardboard edge compression strength test and bonding strength test necessary special sampler, can quickly and accurately cut the standard test size, corrugated cardboard and carton production, scientific research and quality supervision and inspection departments ideal auxiliary test equipment.

Product features:

It can cut the sample with accurate parallelism, there are marks on it, and the parallel spacing can be set

Adopt the imported sliding track, and the Japanese imported blade is closely matched, easily cut out the multi-layer cardboard sample;

The scale adopts laser engraving, the scale is clear, durable and easy to clean;

With strong magnet, the blade is more convenient to install.

Bonding fixture

Note:

1. The incision direction must be parallel or vertical to the corrugated direction, and the test sample must not be loosened during the cutting process;

2. After each cut, pull the handle back to the position to be cut;

3. Do not put your hand on the cutting position to prevent injury;

4, if the cut of the sample is seriously curled or skewed, the blade should be replaced. The blade used can be any commercially available blade of the same type (replacement method: loosen the screw on the tool holder assembly, remove the old blade, replace it with a new blade, adjust the position and Angle of the blade, tighten the screw);

5, when not used for a long time, the blade, guide post, etc., should be coated with anti-rust oil, and add cover dust;

6, the guide sleeve assembly and guide post should often be filled with a small amount of lubricating oil.

Bonding fixture