Значение и использование

3.1 Очистка распылением воды (SSPC-TR2 / КДЕС 6G 198; ССПК-СП 5 (ВАБ)/РОЖДЕНИЕ WAB-1; ССПК-СП 10 (ВАБ)/РОДИЛСЯ ВАБ-2; ССПК-СП 6 (ВАБ)/NACE WAB-3; ССПК-СП 14 (ВАБ)/NACE WAB-8); ССПК-СП 7 (ВАБ)/NACE WAB-4 or not, (SSPC-SP WJ-1 / NACE WJ-1; SSPC-SP WJ-2 / NACE WJ-2; SSPC-SP WJ-3 / NACE WJ- 3; SSPC-SP WJ-4 / NACE WJ-4) abrasive, which can cause flash rust under certain environmental conditions. Inhibitors are used to prevent flash rust during drying and before coating. The inhibitor or the reaction product of the inhibitor on the substrate becomes part of the coating system. Coating properties may be affected by inhibitors. Soluble contaminants or unreacted inhibitors beneath the coating may cause premature failure.

3.2 The user or illustrator needs to determine the specific test method and exposure conditions to be used. Some of the referenced test methods may not be applicable to all types of coatings.

АСТМ Д5367-16 “Стандартная практика оценки покрытий, наносимых на поверхности, заключается в обработке ингибиторами для предотвращения мгновенного ржавления стали при водной или водной/абразивной пескоструйной очистке..

Объем

1.1 This practice includes procedures for assessing the compatibility of coatings to coatings used to prevent rust on steel prior to coating.

1.2 Inhibitors can be used with or without abrasive in combination with a water-sprayed cleaning surface treatment.

1.3 The paint manufacturer should be consulted to ensure the compatibility of the inhibitor with the paint.

1.4 Настоящий стандарт не предназначен для решения всех вопросов безопасности., если таковые имеются, связанный с его использованием. Users of this standard are responsible for establishing appropriate safety and health practices and determining the applicability of regulatory restrictions prior to use.